The Complete Guide To Carbon Management in Real Estate

With the built environment responsible for 40% of global carbon emissions, decarbonising real estate assets must be a key priority for investors and corporate occupiers.

Real Estate Portfolio Carbon Management

The commercial real estate industry has accelerated its focus on responsibility and social purpose. Occupiers, investors and city leaders each have a role to play in meeting demand for greener, more sustainable spaces, and how it can no longer be seen as “just another expense”, instead essential to achieve better sustainability outcomes and financial returns.

We have seen governments facing pressure to pledge ambitious net zero targets, but meeting these targets depends on more than government pledges, with businesses and investors having a vital role to play. Reports have shown that when businesses consider the environmental impact of their investments, they subsequently yield greater value in the future – both from a financial and environmental point of view. The climate crisis poses a financial risk in terms of both physical and transition risks. Transition risks will arise as the economy shifts to become low-carbon and more climate-resilient. As a result, we are seeing more organisations making zero carbon commitments and restructuring their business model and operations to hit their reduction targets.

Main motivations for Real Estate Investment Managers to consider a Carbon Management Plan:

  • Growing pressure with climate-related risks and financial disclosures;
  • ESG Program covering emissions Scope 1, 2 and 3, and a pathway for net zero target;
  • Reliability and Consistency following recognised and approved international standards;
  • Science-based decision making process for more sustainable and cost effective choices at early design stage;
  • Recognition for Industry leadership and collaboration.

Life Cycle Design for projects and portfolio

Over the past decades legislation has focused on the operational impacts of buildings from heating and lighting, rather than on the impacts from the construction materials. In the majority of  countries there is still no legislation requiring the measurement of embodied carbon, although some countries are now providing leadership. There is also insufficient transparency and availability of comparable data for designers, contractors and decision makers.

Life Cycle Assessment (LCA) has been recognised as the most comprehensive method for calculating and reporting greenhouse gas emissions for construction projects. Life-cycle assessments and resulting life-cycle cost considerations are becoming increasingly important and turn the focus on the long-term benefits of sustainable real estate.

In the real estate market in particular, the use of LCA will enable investors to quantify, compare and improve the environmental performance of their assets, and more broadly, the use of LCA will assist in showing how real estate assets that have the highest level of sustainable performance, can drive higher rental incomes and increase client satisfaction. 

“Clients in the real estate market have benefited from the extensive information that can be extracted from eToolLCD and used in Sustainability reports and Carbon Management Programs. Goodman Group and Frasers Property have committed to reduce and offset their Embodied carbon emissions. Using eToolLCD software helps to achieve this goal across their entire portfolio” – says Maryia Perthen, eTool BD Manager.

eTool provides eToolLCD, a calculation tool to measure and report whole life carbon, including both operational and embodied emissions associated with individual projects and portfolios. This calculation covers initial and long term impacts of:

  • Materials
  • Transport
  • Construction
  • Operation (maintenance, repair, replacement)
  • Operational Energy (gas, electricity, other sources)
  • Operational Water supply and treatment
  • End of Life (demolition, waste processing, disposal)
  • Benefits and Impacts beyond the system boundary (product reuse, energy export)

The figure below explains the different life cycle stages and split between embodied and operational carbon:

Life Cycle Design methodology applied to Portfolio Carbon Management will enable Real Estate Investment Managers to track, improve and demonstrate emissions reduction on the path to net zero

  • Measure: Quantify baseline emissions of each building, conduct hot-spot analysis and determine how far there is to go to reach zero emissions.
  • Compare and set a reduction target: Develop a target to achieve the objectives of investors, regulatory requirements/bodies and stakeholders.
  • Create scenarios and reduce impact: Understand the contribution of each improvement strategy and prioritise to achieve the best life cycle return on investment.
  • Certify results and report: Conduct independent review of models and produce results aligned with standards for increased transparency and consistency.

Utilise LCA across the value chain

The use of Life Cycle Analysis is not limited to new build projects only. By utilising the power of eToolLCD, investors can quantify the environmental impacts of any construction project or existing real estate portfolio. Examples include:

  • Modelling Existing Buildings for Adaptive-Reuse in eToolLCD
  • Foot Printing “As Built” or Existing Building
  • Retrofit or Refurbishment of Existing Building
  • New Building that Retains Parts of Existing Building

New Build and Refurbishment Projects

No matter the size of the project, eToolLCD can be utilised throughout all the relevant project stages, allowing the users to model effective component and building level LCA assessments at any project phase.

eToolLCD has benchmark models that can be used at concept stage when only typology and rough floor area is defined. As the design progresses, eToolLCD’s unique template system can be utilised to provide industry average specification and quantities of construction components (piling system, floor slab, structural elements, walls, finishes, services, etc) as well as operational energy and operational water figures. 

Our ever growing library contains 1000’s of templates applicable to all kinds of building and infrastructure projects being built across the globe. Users have the ability to customise construction components and also combine templates to create whole project benchmarks

Standing Assets

eToolLCD can fully support investor and corporate occupiers requirements with regards to Standing Assets, and will enable Facilities Managers to record actual in-use emissions on an annual basis. This will allow the client to better understand the carbon impacts of maintenance, repair and replacement cycles, and to improve this going forward.

eToolLCD can also be utilised to coordinate the expected replacement cycles of key elements (e.g. central plant) and ensure that purchasing can be done with the optimum carbon and financial efficiency on a portfolio wide basis.

Achieve life cycle environmental net benefit

An example of how Life Cycle Design methodology can be used to make informed decisions, is to calculate the environmental payback of a Solar Photovoltaic system over its whole life cycle. The same system can take twice as long to payback in environmental terms depending on the location and the carbon intensity the solar PV system is connected to. There is no simple answer as the result will depend on multiple variables including:

  • Technology efficiency, durability, warranty terms;
  • Solar generation capacity: location, shading, maintenance, cleaning;
  • Environmental Product Declaration – solar panels, inverter, cabling, framing
  • Electricity Grid carbon intensity, as the replaced energy source
  • Electricity Grid decarbonisation factor, accounting for increase contribution of renewables

Industry progress and motivators

Regulatory requirements

There is also a main driving force for change that will be made at a national government level, through legislation and regulations to reduce emissions. Various examples throughout the globe include:

  • The U.S. Securities and Exchange Commission (SEC) recently released a proposed rule requiring mandatory climate disclosure from all U.S. public companies, called the Enhancement and Standardization of Climate-Related Disclosures for Investors
  • Climate standard of the IFRS’ International Sustainability Standards Board (ISSB)
  • Task Force on Climate-related Financial Disclosures (TFCD)

Embodied Carbon Regulations

  • London Plan Policy SI 2 sets out a requirement for developments to calculate and reduce WLC emissions.
  • Part Z – A Proposed Amendment to UK Building Regulations to introduce legislation towards mandatory reporting of carbon emissions in the built environment, along with limiting embodied carbon emissions on projects.
  • Various other regulatory programs in Canada, France, Netherlands and USA.

Other non-regulatory requirements include for example, the World Green Building Council’s (WGBC) Net Zero Carbon Buildings Commitment to reduce (and compensate) all operational and upfront embodied carbon emissions by 2030.

Environmental data and software tools

Regulations will help create free-to-use products and buildings database to reduce complexity and assist the benchmarking and target setting process.

  • Standardisation
  • Increase research and development
  • Reduced complexity, web-based and easy to use
  • Cost effective, SaaS model
  • Increased market demand to meet rating schemes and regulatory requirements

Supporting Green Rating Schemes and Regulatory Requirements

As LCA of the built environment rapidly propagates as a standard component of sustainable design, most rating schemes (buildings and infrastructure) around the world have begun to or/and have already integrated LCA into their credits and framework. eToolLCD meets the requirements of many international schemes and has been successfully utilised to improve the rating performance for many projects all over the world. 

LCA studies conducted for Rating System purposes (frequently with a limited scope covered) can be integrated with LCA studies conducted for Corporate Reporting or Regulatory purpose and ensure the alignment between different use and application of sustainability credentials and LCA results. One example is the increased use of eToolLCD to meet the London Plan – Whole Life Carbon Assessment requirements. eToolLCD is approved by the Greater London Authority (GLA) and is aligned with the RICS guidance to ensure consistency in the lifecycle carbon results. 

Benchmarking embodied carbon

Embodied carbon of new buildings now represents a significant contributor to total emissions. Embodied carbon is often associated with Supply Chain emissions and Scope 3 emissions. Carbon emissions released before the building begins to be used (upfront carbon), will be responsible for half of the entire carbon footprint of new construction between now and 2050.

In order to prevent and mitigate embodied emissions, increase resource efficiency and stimulate the development and market supply of low carbon products, the sector must:

  • reduce and account for its impact on the environment and natural resources through design and construction, and
  • generate a strong and urgent demand signal to activate the necessary finance to decarbonise materials, construction and heavy industry processes.

Advantages of using LCA to calculate embodied carbon

  • Reliable industry-based data (EPD, LCA process-based inventory)
  • Data quality requirements (ISO, EN standard compliant)
  • Tools and functionality (increased scope, streamlined modelling and reporting process (Importing features, BIM integration)
  • Consistency/common metric, standard compliant results and reporting
  • Independent review, third party verification

Recommended process for benchmarking embodied carbon

  • Calculation method: Standard BS EN 15978:2011 Sustainability of construction works. Assessment of environmental performance of buildings.
  • Technical Guidance: RICS Whole life carbon assessment for the built environment
  • System boundary, life cycle stages: Whole life carbon (A-D) and Embodied Carbon (A1-A5, B1-B5, C1-C4)
  • Construction Scope: Substructure, Superstructure, Façade, Finishes, Services, Fittings and Furnishing
  • Data quality: Standard compliant data (EN15804, ISO21930, EPD) Utilise detailed spec: volume, mass, size, quantity, not only financial information.
  • Independent review: Standard compliant review (ISO14044)

Benchmarking and target setting using LCA As-built calculation

  • Accurate measurement of the true embodied carbon to practical completion of a project
  • Specification and origin (for Modules A1–A3) of each product and material delivered to site
  • Transportation mode and distance (for Module A4), will be known in detail
  • On-site material waste tracking and construction activity energy metering will inform a precise Module A5 value.

Impact Reduction Targets

According to the AR6 WG1 report, IPCC (August 2021): the residual global carbon budget to remain within 1.5° global warming with 66% probability is given as 400 billion tonnes CO2 from the start of 2020. Global CO2 emissions are about 36 billion tonnes per year, so the 400 billion tonnes will last just 11 years if no reductions are made.

For a high polluting country such as the UK, with CO2 emissions of 10 tonnes per person per year, the carbon budget will run out by the end of 2024, i.e. in 2 years

Embodied Carbon becomes more relevant in the route to Zero Carbon with the ultra energy efficient buildings and grid decarbonisation. Technical working groups like eTool, LETI, RIBA, GLA, CLF and World GBC recommend at least 40% reduction in embodied carbon by 2030.

As the organisation´s knowledge of embodied carbon increases, assessments utilising LCA methodology undertaken earlier in the design phase become easier to use for decision making. This in turn will lead to increased opportunities to take action on reducing the embodied carbon impact of projects and activities.

  1. Prioritize “Circular Design” – less new buildings and more reuse and refurbishment
  2. Designing more efficient buildings – reduce material and energy demand
  3. Requiring design optimization to use less material and chose lower carbon materials
  4. Requiring low- carbon procurement to ensure the materials used are lower impact than average

Functionality – maximise project primary function:

  • Net Lettable Area
  • Increased lifespan
  • Occupancy

Design and Structural optimisation:

  • Low Carbon Material (biobased)
  • Run whole life carbon scenarios for energy and buildings services
  • EPD – Use buying power to encourage and support the suppliers in their value chain to adopt more sustainable business practices.
  • Design for deconstruction and disassembly

Solutions to reduce emissions within the supply chain will be the most challenging, yet most impactful.

How to achieve your net zero carbon reduction target

  1. Identify key drivers – Investor pressure, tenant demand and increased asset value;
  2. Circular design – Less new buildings and more reuse and refurbishment projects
  3. ESG Program and Carbon Policy – Set targets and consistent requirements for all projects to follow across all their phases;
  4. Define scope and what it means to achieve net zero carbon in practice – Standard compliant whole life carbon calculation and reporting (EN15978);
  5. Quantify and improve performance – Measure the carbon footprint today and define strategies to hit desired target;
  6. Reduce Embodied Carbon – Optimise design to use less material and choose lower carbon options to achieve savings from upfront emissions, as well as operational and end of life embodied carbon;
    1. Materials efficiency can include using lightweight structures or secondary raw materials and products, minimising material loss on the building site and improving the service life and thus durability of products used in buildings. Structural designs for example are often over-engineered and dimensioned above the required level of performance.
    2. Ensuring the use of lowimpact refrigerants in projects should be a priority for all projects using refrigerant-based systems.
    3. Plan, design and specify low-carbon concrete solutions.
  7. Reduce energy consumption – Increase efficiency and the use of renewable energy. Eliminate fossil fuels.

Return on investment

Investors who target a sustainable strategy are rewarded through a combination of higher rents, stronger leasing velocity and higher occupancy rates throughout the cycle.

Global property insurance premiums have grown significantly as real estate portfolios sustain physical damage from natural disasters. Many existing properties will be rated as “high carbon” and will successively fall behind when competing for customers and occupancy rates and investors in the mid to longer term future.

Real-estate organisations can use their physical presence to generate and store energy with solar arrays and batteries, helping to stabilise energy grids and reduce the costs associated with clean energy. Firms can introduce new revenue streams, including vehicle charging, green-facilities management, and other on-site services that enable occupants’ sustainable preferences. Organisations can support occupants by tracking emissions using smart sensors and tracking energy consumption through heating, cooling, lighting, and space management.

Firms that are able to lower impact will reduce future costs of carbon offsetting and also have an advantage in attracting capital for net-zero buildings or investment themes that support community-scale decarbonization.

eToolLCD Software Features

Real Estate Portfolio Wide Reporting

Investors and corporate occupiers who are required to report their portfolio emissions, can utilise the robust LCA data available in eToolLCD via our reporting functionality. 

The reporting structure uses a Life-Cycle approach instead of the Greenhouse Gas Protocol standard (Scope 1, 2 and 3), and includes all assessment and reporting in relation to BS EN15978 life cycle stages (Product, Construction, Use, End of Life, Beyond project life cycle) to ensure the whole asset life cycle emissions are included in scope. GHG Protocol Scope 1, 2 and 3 results can also be extracted from eToolLCD.

eToolLCD Portfolio Wide Reporting allows the client to calculate and report Whole Life emissions applied to major developments, refurbishments, deconstruction of an asset and in-use developments. Software users can utilise the organisation dashboard, where GHG emission and reduction from all projects can be quantified. Software users can create projects and collaborate with the internal design team and external specialists in one centralised portal in eToolLCD.

Life Cycle Costing

LCA and Life Cycle Costing (LCC) Integration. It is unavoidable that where there is carbon, there is going to be a cost associated. However it is not always clear to the investor or client, that by reducing the environmental impacts, can also improve the bottom line. 

One of the most powerful parts of eToolLCD’s unique template structure is the inclusion of data on all people and equipment impacts as well as materials that make up a construction component. Templates include maintenance as well as replacement costs over the project life cycle, allowing users to conduct Life Cycle Costing integrated with environmental performance. More info on eToolLCD advanced features.

Common challenges and best practices in data collection and reporting

Organisations are used to GHG Protocol, mainly focusing on Scope 1 and 2 and not including Scope 3. Real Estate emissions categorised as Scope 3 are extremely significant and must be part of the calculation and reporting framework. Since Scope 3 emissions are not directly under a company’s control, they are difficult to assess. But companies cannot afford to bypass or ignore them anymore.

However it is important to distinguish between embodied carbon and what is classified as scope 3. For example:

  • tenant energy use (B6) is reported as scope 3, but it is not embodied carbon, it is indirect emissions, not controlled by the asset owner.
  • refrigerant gases fugitive emissions (B1 and Scope1) and equipment use (A5) depends if it is directly controlled by the organisation (Scope 1) or sub-contracted (Scope 3).

A whole life carbon approach using the project life cycle stages make it easier to assess all emissions associated with the project life cycle, despite the fact if they are owned or controlled by the organisation (direct / indirect) or upstream / downstream emissions.

Carbon Accounting vs Life Cycle Design. Carbon Accounting will focus on past emissions and use this information to help mitigate future emissions. Life Cycle Design has a focus on forecasting both upfront and long term emissions during early concept stage and preventing these emissions from occurring by finding better alternatives.

Carbon calculation based on LCA has specific standards for construction projects (EN15978) and materials (EN15804, ISO21930) which makes it easier for Real Estate organisations to include all emissions in scope with increased consistency and reproducibility.

About eTool

eTool serves the organisations who are aiming to lead the industry in delivering low carbon buildings and infrastructure. eTool provides eToolLCD software for optimising whole of life carbon and cost of new and existing construction projects, aligned with best practice international standards for Life Cycle Assessment. eToolLCD life cycle design software is targeted at large construction projects and asset portfolios. It is a technically superior, secure, collaborative, holistic, high value carbon management platform. Proven by our world leading customer and project list.

eToolLCD software will provide the following benefits when used as part of an ESG Program:

  • Easy to use and collaborative, large user base of LCA experts
  • Whole life carbon calculation, including both operational and embodied carbon
  • Detailed calculation of embodied carbon including upfront, maintenance and end of life emissions.
  • Full carbon accounting and extraction of results aligned with GHG Protocol (Scope 1, 2 and 3)
  • Design tool to assist the decision making process and best return on investment
  • Carbon management at project level as well as whole portfolio
  • Standard compliant data for materials and services (generic and product specific EPD), transport, construction impacts, operational water and operational energy

 

References:

UKGBC Scope 3 Guidance for Commercial Real Estate

 

 

 

Greenbuild 2019 all eyes on embodied impacts

The conference and expo took place in Atlanta and kicked off with the 44th president of the United States Barack Obama in a casual conversation with USGBC President Mahesh Ramanujam and a large crowd at the Georgia World Congress Center. Obama highlighted the challenge we have in front of us to create a global capitalism that reduces inequality. He reinforced that social sustainability will empower people to solve environmental issues across the entire planet. He also shared experiences as a President when negotiating global reductions in greenhouse gas emissions and the importance to consider the “per capita” basis. “I get that we have a culture that like “BIG”, but we have to rethink the size of our homes, our lifestyle and what really gives us satisfaction”.

The event this year was inspiring because of the increased momentum for Whole Building LCA and embodied carbon reduction. There were many educational sessions showcasing LCA studies, research publications and a whole industry movement around understanding relative impacts between different project areas and life cycle stages. Global campaigns like WGBC “Bringing Embodied Carbon Upfront” and Architecture 2030 “New Buildings Embodied Carbon” were referenced in many presentations.

eTool reduce carbon eTool embodied carbon

eTool participated in an educational sessions named: “Don´t shine away from Whole Building LCA”, which the intent was to show the audience case studies and encourage higher uptake of the WBLCA credit. After the main presentation, there was a “Speed Dating” workshop for conference participants to meet with LCA tool providers, learn about their software and share some success stories.

It was motivating to see a collaboration from experts highlighting the importance of the LCA methodology to reduce carbon emissions in the built form, a topic that eTool work hard since 2009 to help transform the construction industry! The team at eTool produced online content on how to apply the methodology and achieve carbon reduction goals with our eToolLCD software:

Additional references for LCA applied to the construction industry can be found at:

 

eTool UK Team Updates

Leadership Changes

David Blain is joining eTool as a non-executive director in the UK.  David is a seasoned executive in the tech sector with significant experience developing and managing high-performance teams in sales, service and support. eTool is looking forward to drawing on David’s deep experience to refine business strategy and risk management.  

Pat Hermon has resigned as a UK Director and Business Development Manager.  Enquiries will be directed to: 

  • Adrian Giles (Business Development Enquiries) 
  • Richard Haynes (Technical Enquiries relating to Software and Services)

Business Development 

eTool employed a new dedicated Business Development professional for the UK office – Adrian Giles.  Adrian has a vast experience in the construction sector. He is already collaborating with clients and new prospect to continue expanding eTool´s presence in the UK and Europe. 

Services and eToolLCD Support Team

eTool are adding two members to the technical staff in the UK.  

We recently welcomed Leonardo Poli to the eTool UK Life Cycle Design Services team.  Leonardo is about to receive his MSc Engineering Project Management where he specialised in environmental assessment and became an experienced eToolLCD user.  His dissertation addressed the topic of reuse, recycling, circular economy and its application in the construction industry. Leonardo used LCA to inform the conclusions of the paper.  

Marios Tsikos joined the eTool UK Life Cycle Design Services team in January.  He holds an MSc Civil Engineering qualification and bring a strong engineering background with particular skills in LCA, BIM and building services engineering.

Other Changes

eTool have also recently increased the size of our software development team to help accelerate our roadmap.  We will likely be reaching out to all our users soon to help us prioritise the next big feature sets.  

Farewell and Thank You to Pat Hermon

eTool want to formally thank Pat for his contribution to eTool over the last 6 years.  Pat joined the eTool in 2012 at the Australian office delivering Life Cycle Design Services.  Some of the highlights of Pat’s time at eTool include 

  • Whilst in the services team Pat regularly topped the service team Greenhouse Gas Savings metric (uptake of recommendations by developers to improve the life cycle GHG performance of buildings) 
  • Co-authoring the first EN15978 compliant LCA in Australia
  • Starting the UK branch of eTool in 2016, supporting the business both commercially and technically
  • Authoring the first eTool LCA for BREEAM
  • Authoring the first eTool ISO15686 compliant LCC in the UK and developing cost datasets
  • Engaging and supporting key clients such as HS2, Aecom, Arup, Hilson Moran, JRA, ADW, Method and our expanding list of construction professionals

 Thank you for all your incredible work Pat!

Pat portrait

New UK Business Development Manager Opportunity

eToolLCD With Cogs (Rich)

UK Business Development Manager, £55k+

eTool operates in the unique space of sustainability via clever technology – join us to be a part of our exciting future. We offer the world leading life cycle design software for sustainable buildings and infrastructure. eTool provides a flexible working environment and the excitement of working with an ambitious early stage company in a space that is vital for tackling climate change.

eTool has expanded our market reach to become a truly global entity with offices in Australia, the U.K. and Americas. We also have an impressive tier one client base from which to build on.

At this pivotal point in the company’s journey we are striving to rapidly grow the software subscriber user base and increase our national and global profile. With bright opportunities in front of us right now, we are seeking to hire a driven Business Development Manager to help build on our existing sales trajectories and accelerate revenue for eTool. The responsibilities of this role will grow with the business, and given eTool’s growth trajectory this presents an excellent opportunity for a high performing employee to take their career to the next level.

Role responsibilities:

  • Understand and interpret eTool’s overall vision to generate and maintain the BD strategy
  • Prospecting – building on our client base to accelerate new lead and client generation.
  • Pitching – selling eToolLCD software and consultancy services to the construction sector
  • Communications and closing – following leads and ensuring effective delivery of eTool message throughout sale.
  • Monitoring existing eTool clients – refining our interaction and marketing towards them.
  • Ensuring that eTool clients are “quality” clients – managing expectations and continued engagement to ensure repeat business
  • Maintenance of the customer relations management system and sales reports
  • Assistance in improving sales processes, refining marketing materials and attending events

We’re on the lookout for people with a passion for the environment and who want to make a difference. This sales role requires initiative, autonomy, persistence and determination. A desire to make a big contribution to the low carbon future is important, that is how we measure our success. The maturity to know when, where and how to focus your efforts to foster both the short term and long term success of the business.

Our requirements:

  • Relevant degree and/or masters
  • Excellent sales skills and experience with proven track record
  • Minimum 3 years demonstrable experience in liaising with, engaging and presenting to senior business leaders (preferably within the construction industry)
  • Excellent communication skills particularly spoken and presentation
  • Ability to influence decision makers and drive positive outcomes for construction teams
  • An ability to efficiently conduct your work (punctuality, priority management, risk perception)
  • High ethical standards
  • You’re willing to participate in a flexible, vibrant workplace

Desirable experience:

  • Awareness of BREEAM, LEED and sustainability ratings schemes
  • Previous experience or working knowledge of construction and sustainability consultancy (and key challenges they face)

The support we’ll give you:

  • Performance based equity in eTool, own part of the business you’re helping create
  • Amazing mentors including of senior consultants on our team and the company founders
  • Training and regular meetings to set and manage work objectives and career goals
  • A flexible, results focussed work environment

The satisfaction you’ll get:

  • eToolLCD is currently helping designers see and avoid 100,000’s of tonnes of CO2e (and lots of other environmental impacts) in their building and infrastructure projects. We want to ramp this up to millions of tonnes of avoided CO2e
  • Experience, training and career progression opportunities hard to match in other roles
  • Invaluable experience in the discipline of Life Cycle Assessment which continues to grow in popularity and credibility as the number one method for improving environmental performance

Salary:

Negotiable depending on experience – the right candidate can expect a packaged salary of £55k+ including pension and commission.

Location:

Flexible (any major urban centre in the UK)

We recognise our employees as being our number one asset and want to share our success with you. Our workplace enables encourages creativity, passion and commitment. We are looking for like minded people to help us achieve our vision.

 

 

New Sustainability Consultant, Life Cycle Designer Opportunity

eToolLCD With Cogs (Rich)

eTool operates in the unique space of sustainability via clever technology – join us to be a part of our exciting future. We offer the world leading life cycle design software for sustainable buildings and infrastructure. eTool provides a flexible working environment and the excitement of working with an ambitious early stage company in a space that is vital for tackling climate change.

The built form is responsible for more than 30% of global carbon emissions. It is imperative that design tools and services are available that provide quantifiable environmental improvements that are economically viable – eTool does just this with eToolLCD software and our Life Cycle Design services.

The role will require:

  • Use eToolLCD software to undertake life cycle environmental and cost assessments of buildings and infrastructure to produce meaningful, quantifiable sustainability and cost comparisons between design options
  • Identify and model environmental performance improvement opportunities
  • Liaise with design teams to communicate and justify improvement opportunities, assist with design implementation when requested
  • Reporting results to relevant standards and frameworks
  • Support our eToolLCD Coaching team delivering an outstanding user experience to the eToolLCD community

We’re on the lookout for people with a passion for the environment and who want to make a difference. You don’t mind crunching numbers, are happy working autonomously and can confidently speak to groups to communicate your work. Research skills, initiative and lateral thinking ability will be highly regarded. Preferred at least 5 years professional experience and relevant graduate degree.

The support we’ll give you:

  • A salary in the range of £40k-£50k depending on the strength of your application
  • Performance based equity in eTool, own part of the business you’re helping create
  • Amazing mentors including of senior consultants on our team and the company founders
  • Training and extensive experience in the use of eToolLCD software and CAD packages to interpret designs, model life cycle impacts and generate LCA outputs
  • Detailed training and support improving the environmental performance of designs which is why eTool exists
  • A flexible, results focussed work environment

The satisfaction you’ll get:

  • eToolLCD is currently helping designers see and avoid 100,000’s of tonnes of CO2e (and lots of other environmental impacts) in their building and infrastructure projects. We want to ramp this up to millions of tonnes of avoided CO2e
  • Experience, training and career progression opportunities hard to match in other roles
  • Invaluable deep experience in the discipline of Life Cycle Assessment which continues to grow in popularity and credibility as the number one method for improving environmental performance

Our requirements:

  • You must be able to think laterally, problem solving is key.  You must bring an enquiring mind motivated to reduce the impacts of buildings on the planet
  • An ability to efficiently conduct your work (punctuality, priority management, risk perception)
  • Empathy for the planet and the customer when delivering work
  • High ethical standards
  • You’re willing to participate in a flexible, vibrant workplace

Salary:

Negotiable depending on experience – the right candidate can expect a packaged salary of up to £50k.

Location:

Flexible (any major urban centre in the UK)

We recognise our employees as being our number one asset and want to share our success with you. Our workplace enables encourages creativity, passion and commitment. We are looking for likeminded people to help us achieve our vision.

 

 

eTool Quality System ISO 9001 Certified

eTool has always taken quality seriously, from our earliest beginnings we actively sought feedback on our product and services and have embedded continuous improvement into our DNA.  Earlier this year we decided to formalise our Quality Management by employing Compass Assurance Services to certify our systems against ISO 9001:2015. eTool founder and Co-CEO reflects on the process:

“Solving problems is what eTool do. We apply that philosophy everyday, be it helping to solve a problem as big as climate change, or shaving microseconds off eToolLCD response times.  Being able to have our quality management system formally recognised is rewarding.  Compass Assurance Services were really thorough, they went pretty deep.  Although we had things pretty dialled there was certainly some really valuable learnings from the process, we’re an even better business for it.” 

Richard Haynes

The 9001 certification adds to the extensive efforts and achievements of eTool in technical assurance with third party input.  Read more about our assurance milestones here.

eTool’s certificate can be downloaded here and the certification is registered with JAS-ANZ.

New Software Developer Opportunity

eToolLCD With Cogs (Rich)

Our vision is a fun and fulfilling future in balance with the planet. Our business is committed to decarbonising the built form.  eToolLCD is our fast growing SaaS product. It optimises the environmental performance of buildings & infrastructure. You will be developing eToolLCD.

The challenges you will face:

  • Fast track to senior developer responsibilities (and beyond)
  • Fast and rich feature development in our web app which demands a beautiful interface, great user experience whilst processing some deep maths under the hood
  • Full stack development exposure – UX / UI design, front end, back end, DB admin, integrations and basic server management
  • We’re setting you up to lead our dev work, you will learn fast and help with key architectural decisions
  • We deliver in an agile manner. Things are fast moving, flexible, at risk of breaking and exiting

The support we’ll give you:

  • Some food on the table – salary starting at $60k-$80k but we’ll ramp this up in line with your responsibilities. Also performance based equity in eTool, own part of the business you’re helping create
  • Amazing mentors – you’ll get to pick the brains of our founders and we have a senior developers on our advisory team who periodically reviews our code and gives us invaluable feedback

The satisfaction you’ll get:

  • eToolLCD is currently helping designers see and avoid 100,000’s of tonnes of CO2e (and lots of other environmental impacts) in their building and infrastructure projects. We want to ramp this up to millions of tonnes of avoided CO2e
  • Product ownership: your fingerprints will be all over our product, you will be a big part in guiding its continued success. Big opportunity for pride in your work here.
  • Incredible, fast tracked experience and responsibility.

Our requirements:

  • You must be able to think laterally, problem solving is key
  • You’re user-centric in your approach to delivering software
  • You can prioritise and manage your time effectively
  • You have an enquiring mind
  • You’re willing to participate in a vibrant workplace
  • Our current stack is web app, ASP.NET frame work with MySQL Database running in the cloud. But we don’t particularly care what language you’re a current gun in, we know good developer transcend languages and frameworks.

About us:

eTool operates in the unique space of sustainability via clever technology – join us to be a part of this exciting future. We offer the world a leading life cycle design app for sustainable buildings and infrastructure.

eTool has achieved some particularly exciting milestones over the last 18 months expanding our market reach to become a truly global entity with offices in Australia, the U.K. and Americas.

At this pivotal point in the company’s journey we are striving to rapidly grow the software subscriber user base and increase our local and global profile. With bright opportunities in front of us right now, eTool provides a flexible working environment and the excitement of working with an ambitious early stage company in a growth field that is vital for tackling climate change.

Apply Here

 

 

Software Developer Opportunity

eToolLCD With Cogs (Rich)

Our vision is a fun and fulfilling future in balance with the planet. Our business is committed to decarbonising the built form.  eToolLCD is our SaaS product which is growing at 300% PA. It optimises the environmental performance of buildings & infrastructure. You will be developing eToolLCD.

The challenges you will face:

  • Fast track to senior developer responsibilities (and beyond)
  • Fast and rich feature development in our web app which demands a beautiful interface, great user experience whilst processing some deep maths under the hood
  • Full stack development exposure – UX / UI design, front end, back end, DB admin, integrations and basic server management
  • We’re setting you up to lead our dev work, you will learn fast and help with key architectural decisions
  • We deliver in an agile manner. Things are fast moving, flexible, at risk of breaking and exiting

The support we’ll give you:

  • Some food on the table – salary starting at $50k but we’ll ramp this up in line with your responsibilities. Also performance based equity in eTool, own part of the business you’re helping create
  • Amazing mentors – you’ll get to pick the brains of our founders and we have an amazing senior developer on our advisory team who periodically reviews our code and gives us invaluable feedback

The satisfaction you’ll get:

  • eToolLCD is currently helping designers see and avoid 100,000’s of tonnes of CO2e (and lots of other environmental impacts) in their building and infrastructure projects. We want to ramp this up to millions of tonnes of avoided CO2e
  • Product ownership: your fingerprints will be all over our product, you will be a big part in guiding its continued success. Big opportunity for pride in your work here.
  • Incredible, fast tracked experience and responsibility.

Our requirements:

  • You must be able to think laterally, problem solving is key
  • You’re user-centric in your approach to delivering software
  • You can prioritise and manage your time effectively
  • You have an enquiring mind
  • You’re willing to participate in a vibrant workplace
  • Our current stack is web app, ASP.NET frame work with MySQL Database running in the cloud. But we don’t particularly care what language you’re a current gun in, we know good developer transcend languages and frameworks.

About us:

eTool operates in the unique space of sustainability via clever technology – join us to be a part of this exciting future. We offer the world a leading life cycle design app for sustainable buildings and infrastructure.

eTool has achieved some particularly exciting milestones over the last 18 months expanding our market reach to become a truly global entity with offices in Australia, the U.K. and Americas.

At this pivotal point in the company’s journey we are striving to rapidly grow the software subscriber user base and increase our local and global profile. With bright opportunities in front of us right now, eTool provides a flexible working environment and the excitement of working with an ambitious early stage company in a growth field that is vital for tackling climate change.

Please apply at this link: etool.polldaddy.com/s/softwaredeveloper2017

 

 

GBCA Feedback

eTool drives on innovation and forward thinking to bring solutions and help us mitigate environmental impacts. We have been working closely with GBCA since 2013 when LCA was included as an Innovation Challenge. Since completing its first LCA later that year, eTool has become a leader in providing consultancy and software services related to LCA for the Green Building industry.
There are now over 50 projects that used eToolLCD to achieve the Materials Life Cycle Impact credit and technical experience was developed internally at eTool and amongst software users.
The construction industry is moving to LCA for environmental decision making, and recognising that the only way to prevent adverse trade off is to use life cycle assessment within a life cycle design process. Following this global trend, eTool thought it was very important to provide feedback when GBCA opened for public consultation. Here are some of the key points included:
• Consideration of functionality in the principles, and use of LCA as early as possible to inform the design process.
• Normalisation and weighting should be considered to prevent negative trade offs between environmental impacts and guarantee whole of building performance.
• Use of LCA model to calculate GHG, Water and other life cycle impacts because it is very flexible, it delivers good environmental outcomes and it is aligned with global trend, which simplifies the maintenance of GS calculator tools.
We look forward to the advancements of LCA use within the Green Building industry so please stay tuned for more news on this soon.

 

Featured User – James Leiper

James Leiper, Pritchard Francis

We now have over 1,800 registered eToolLCD users across 61 different countries and we’d like to take a moment each month to celebrate some of our amazing users who are working towards a more sustainable future.

Our featured user of August 2016 is James Leiper from Pritchard Francis. James is a Project Engineer based in Perth who joined the eToolLCD community in May 2016 and recently completed his first full LCA study.

This month we chatted to James about LCD and asked the following questions:

  • What does sustainable building mean to you?

“I see sustainable building as that which accounts for the needs of the present, without compromising the needs of the future society. I like thinking of sustainable designs as those incorporating a really holistic approach to design, where innovation across the different disciplines can come together to create something amazing!”

  • What inspires you about life cycle design?

“I love that you can demonstrate the true benefits of using more sustainable products over their full life cycle. It helps prevent the “easy way out” approach of maybe using the cheapest up-front solution, as often the more sustainable option will be the smarter and more economical choice over time.”

  • What do you like about creating your own LCA models?

“I like being able to change elements in the models at my leisure to get the full picture and where we, as designers, can have the most impact! There’s also nothing quite like knowing how much you’re doing to contribute to sustainability in design on your own projects.”